Sign In | Join Free | My phrmg.org
China E-link China Technology Co., Ltd. logo
E-link China Technology Co., Ltd.
E-link China Technology Co.,Ltd. Professional Fiber Optical Communication and CCTV Security Transmission Product Manufacturer
Verified Supplier

8 Years

Home > SFP Optical Transceiver Module >

CWDM Duplex Ge SFP Optical LC Connector SX Transceiver Module 1470~1610nm Wavelength

E-link China Technology Co., Ltd.
Trust Seal
Verified Supplier
Credit Check
Supplier Assessment

CWDM Duplex Ge SFP Optical LC Connector SX Transceiver Module 1470~1610nm Wavelength

Brand Name : E-link China

Model Number : LNK-XFP-10G-CWDM- 40

Certification : CE, RoHS, FCC

Place of Origin : Shenzhen, China

MOQ : 1 piece

Payment Terms : T/T, Western Union, MoneyGram, Paypal

Supply Ability : 1000000000pcs/Month

Delivery Time : 3-5 working days

Packaging Details : 10 piece in 1 carton box

Wavelength : 1470~1610nm

Type : CWDM EML

Multi protocol : 9.95Gb/s to 11.3Gb/s

30 pin connector : Support

Power supply voltages : +3.3V,+5V

Power dissipation : <3.5W

Price : Negotiation

Contact Now

10Gb/s XFP CWDM Duplex LC 1470~1610nm SFP Optical Transceiver Module

Features:

  • Support multi protocol from 9.95Gb/s to 11.3Gb/s
  • Hot pluggable 30 pin connector
  • Compliant with XFP MSA
  • Transmission distance of 40km over single mode fiber
  • CWDM EML laser transmitter.
  • Duplex LC connector
  • 2-wire interface for management and diagnostic monitor
  • XFI electrical interface with AC coupling
  • Power supply voltages: +3.3V,+5V
  • Temperature range 0°C to 70°C
  • Power dissipation: <3.5W
  • RoHS Compliant Part

Applications:

  • CWDM Networks
  • SONET OC-192/SDH STM-64
  • 10GBASE-ER/EW Ethernet
  • 40km 10G Fiber Channel

Description:

E-link’ LNK-XFP-10G-CWDM Small Form Factor 10Gb/s (XFP) transceivers are compliant with the current XFP Multi-Source Agreement (MSA) Specification. The high performance cooled CWDM EML transmitter and high sensitivity PIN receiver provide superior performance for SONET/SDH and Ethernet applications up to 40km optical links.

l Absolute Maximum Ratings

Parameter Symbol Min Max Unit
Storage Temperature TST -40 +85
Case Operating Temperature TIP 0 +70
Supply Voltage 1 VCC3 -0.5 +4.0 V
Supply Voltage 2 VCC5 -0.5 +6.0 V

l Electrical Characteristics (Condition: TOP = 0 to 70 °C)

Parameter Symbol Min Typ Max Unit Note
Supply Voltage 1 Vcc5 4.75 5.25 V
Supply Voltage 2 Vcc3 3.13 3.45 V
Supply Current – Vcc5 supply Icc5 250 mA
Supply Current – Vcc3 supply Icc3 500 mA
Module total power P 3.5 W
Transmitter
Input differential impedance Rin 100 1
Differential data input swing Vin,pp 150 820 mV

Transmit Disable Voltage VD 2.0 Vcc V
Transmit Enable Voltage VEN GND GND+0.8 V
Transmit Disable Assert Time T_off 100 ms
Tx Enable Assert Time T_on 100 ms
Receiver
Differential data output swing Vout,pp 300 500 850 mV
Data output rise time tr 35 ps 2
Data output fall time tf 35 ps 2
LOS Fault VLOS fault Vcc – VccHOST V 3
0.5
LOS Normal VLOS norm GND GND+0.5 V 3
Power Supply Rejection PSR See Note 4 below 4

Note:

  1. After internal AC coupling.
  2. 20 – 80 %
  3. Loss Of Signal is open collector to be pulled up with a 4.7k – 10kohm resistor to 3.15 – 3.6V. Logic 0 indicates normal operation; logic 1 indicates no signal detected.
  4. Per Section 2.7.1. in the XFP MSA Specification.

l Optical Characteristics (Condition: TOP = 0 to 70°C)

Parameter Symbol Min Typ Max Unit Ref.
Transmitter
Operating Date Rate B 9.95 11.3 Gb/s
Bit Error Rate BER 10-12
Output Power Po -1 +4 dBm 1
Optical Wavelength λ λ-6.5 λ+6.5 nm
Optical Extinction Ratio ER 6 dB
Spectral Width Δλ 1 nm
Side mode Suppression ratio SMSRmin 30 dB
Rise/Fall Time (20%~80%) Tr/Tf 35 ps
Average Launch power of OFF POFF -30 dBm
Transmitter
Tx Jitter Txj Compliant with each standard
requirements
Optical Eye Mask IEEE802.3ae 2
Receiver
Operating Date Rate BR 9.95 11.3 Gb/s
Receiver Sensitivity Sen -16 dBm 2
Maximum Input Power PMAX 0 dBm 2
Optical Center Wavelength λC 1260 1600 nm
Receiver Reflectance Rrx -27 dB
LOS De-Assert LOSD -17 dBm
LOS Assert LOSA -27 dBm
LOS Hysteresis LOSH 0.5 5 dB
Notes:

  1. The optical power is launched into SMF.
  2. Measured with a PRBS 2-31-1 test pattern @11.1Gbps BER<10-12.

Pin Assignment:

Diagram of Host Board Connector Block Pin Numbers and Name

Pin Description:

Pin Logic Symbol Name/Description Ref.
1 GND Module Ground 1
2 VEE5 Optional –5.2 Power Supply – Not required
3 LVTTL-I Mod-Desel Module De-select; When held low allows the module to ,
respond to 2-wire serial interface commands
4 LVTTL-O Interrupt (bar); Indicates presence of an important condition 2
Interrupt which can be read over the serial 2-wire interface
5 LVTTL-I TX_DIS Transmitter Disable; Transmitter laser source turned off
6 VCC5 +5 Power Supply
7 GND Module Ground 1
8 VCC3 +3.3V Power Supply
9 VCC3 +3.3V Power Supply
10 LVTTL-I SCL Serial 2-wire interface clock 2
11 LVTTL- SDA Serial 2-wire interface data line 2
I/O
12 LVTTL-O Mod_Abs Module Absent; Indicates module is not present. Grounded in 2
the module.
13 LVTTL-O Mod_NR Module Not Ready; 2
14 LVTTL-O RX_LOS Receiver Loss of Signal indicator 2
15 GND Module Ground 1
16 GND Module Ground 1

17 CML-O RD- Receiver inverted data output
18 CML-O RD+ Receiver non-inverted data output
19 GND Module Ground 1
20 VCC2 +1.8V Power Supply – Not required
Power Down; When high, places the module in the low power
stand-by mode and on the falling edge of P_Down initiates a
21 LVTTL-I P_Down/RST module reset
Reset; The falling edge initiates a complete reset of the
module including the 2-wire serial interface, equivalent to a
power cycle.
22 VCC2 +1.8V Power Supply – Not required
23 GND Module Ground 1
24 PECL-I RefCLK+ Reference Clock non-inverted input, AC coupled on the host 3
board – Not required
25 PECL-I RefCLK- Reference Clock inverted input, AC coupled on the host board 3
– Not required
26 GND Module Ground 1
27 GND Module Ground 1
28 CML-I TD- Transmitter inverted data input
29 CML-I TD+ Transmitter non-inverted data input
30 GND Module Ground 1

Note

  1. Module circuit ground is isolated from module chassis ground within the module.

  1. Open collector; should be pulled up with 4.7k – 10k ohms on host board to a voltage between 3.15Vand 3.6V.
  2. A Reference Clock input is not required .

Digital Diagnostic Functions:

As defined by the XFP MSA 1 , E-link’s XFP transceivers provide digital diagnostic functions via a 2-wire serial interface, which allows real-time access to the following operating parameters:

  • Transceiver temperature
  • Laser bias current
  • Transmitted optical power
  • Received optical power
  • Transceiver supply voltage

It also provides a sophisticated system of alarm and warning flags, which may be used to alert end-users when particular operating parameters are outside of a factory-set normal range.

The operating and diagnostics information is monitored and reported by a Digital Diagnostics Transceiver Controller (DDTC) inside the transceiver, which is accessed through the 2-wire serial interface. When the serial protocol is activated, the serial clock signal (SCL pin) is generated by the host. The positive edge clocks data into the XFP transceiver into those segments of its memory map that are not write-protected. The negative edge clocks data from the XFP transceiver. The serial data signal (SDA pin) is bi-directional for serial data transfer. The host uses SDA in conjunction with SCL to mark the start and end of serial protocol activation. The memories are organized as a series of 8-bit data words that can be addressed individually or sequentially. The 2-wire serial interface provides sequential or random access to the 8 bit parameters, addressed from 000h to the maximum address of the memory.


Product Tags:

cisco compatible sfp modules

      

fiber optic transceiver module

      
 CWDM Duplex Ge SFP Optical LC Connector SX Transceiver Module 1470~1610nm Wavelength Manufactures

CWDM Duplex Ge SFP Optical LC Connector SX Transceiver Module 1470~1610nm Wavelength Images

Inquiry Cart 0
Send your message to this supplier
 
*From:
*To: E-link China Technology Co., Ltd.
*Subject:
*Message:
Characters Remaining: (0/3000)